Escaping Outdoors 12v FL diaphragm water pump 100PSI pressure switch
Print

Escaping Outdoors 12v Pump 100 PSI Pressure Switch

$ 22.00
Incl GST
Product SKU : FLPS100PSI

Description

Escaping Outdoors sells a large range of 12v water pump pressure switch, pump parts and accessories including the Escaping Outdoors 100 PSI pressure switch. Made to suit the Escaping Outdoors FL3203 high pressure chemical pump for single wand and small boom spray chemical applications.

If your pressure switch fails after a short time the most likely cause is an inbalance of pressure in the pump system which results in excess tork on the water pump motor. Pressure switch failure will stop the pump operating and protect the water pump from further damage to the motor or diaphragm. If you feel you are going through too many pressure switches it is an indication your pump set up needs refining. Refinement will depend on the application. Please phone or contact us if you require technical help with your water pump set-up

Escaping Outdoors 12v FL3203 water pump 100PSI pressure switch specifications

  • 100 PSI
  • Simple and easy to replace
  • Fine tune pressure adjustment screw
  • Overall dimensions 32 x 32 x 26mm
  • Mounting screw holes 35mm centre to centre
  • Your pressure switch will be sent with Tracking
  • Suits FL3203 pump

Check out article in FAQ's on how to test for a failed pressure switch and other articles on 12v water pumps which may be of interest.

Related Products

Related Categories

Escaping Outdoors 100 PSI Pressure Switch & Seal Kit Escaping Outdoors 24 Volt FL Pump Motor
Back to: Pump Parts and Accessories