Call: 0412 150 120

All Categories

Escaping Outdoors PC13A pressure controller water pump controller for pumps to 2HP

PC13A Pressure Pump Controller - Pumps to 1.75 HP

$ 82.00
Incl GST
Product SKU : PC13A


The Escaping Outdoors electronic water pump pressure controller makes using your pump at home much easier. Turn on a tap, and the pressure controller will automatically switch on the water pump. Turn off the tap, and off goes the pressure pump – thanks to this controller.

The cut in pressure on the pump controller is adjustable from 1.5 BAR (Approx. 22 PSI) to 3 BAR (Approx. 44 PSI). The cut out pressure is determined by your water pump's capacity. The PC13A pressure controller comes complete with its own pressure gauge and non-return valve. What's more, it will automatically turn off the pump if there's no water present, protecting your pump.

Your pump controller comes complete with everything prepared - no electrician is required. Just mount it on the pump and plug it in. All you'll need is plumbers' sealing tape for mounting. Your pump must be able to reach a pressure of 2.5 BAR (36 PSI) for the controller to work correctly. This pressure pump controller suits most pumps up to 1.75HP.

Escaping Outdoors PC13A pressure pump controller features

  • Run dry protection for your pump
  • Non-return valve
  • Wired up ready to go - no electrician needed
  • Installation instructions included
  • Adjustable
  • Automatic
  • Suitable for drinking water
  • Keeps a constant pressure

Escaping Outdoors PC13A pressure pump controller specifications

  • 220-240 volt
  • 50/60 Hertz
  • Max Current: 10 Amps
  • Suited for pumps up to 1.75 HP
  • Rated: 1.1kw
  • Max Water Temp: 60 degrees
  • Starting Pressure: 1.5 BA
  • Manual start (reset) switch

Related Products

Related Categories


Call: 0412 150 120