Call: 0412 150 120

All Categories

Escaping Outdoors PC10P pressure pump controller for pumps 2 to 3HP

PC10P Pressure Pump Controller 2-3HP Pumps

$ 119.00
Incl GST
Product SKU : PC10P


The Escaping Outdoors PC10P water pump pressure controller is for 2-3 horsepower pressure pumps to automate your pressure pump. Turn on a tap, and the water pump controller will automatically switch on the water pump. Turn off the tap, and off goes the pump – thanks to this pump controller. If no water is present, the pressure controller automatically turns the pump off, protecting it from damage.

This pressure pump controller will run a pump with a peak draw of 30 amps, drawing 18 amps when running – easily controlling a pump up to 3HP. It has rating of IP65 which is ideal for safe use outdoors.

Comes complete with everything prepared for the 10 Amp pump- no electrician is required. Just mount it on the pump and plug it in. All you'll need is plumbers' sealing tape for mounting.

If your pump has a 15 Amp plug or greater, the safe option is to have your controller wired in by an electrician.

The pump controller is not adjustable, and has a factory pre-set cut in pressure of 2.2 BAR (32 PSI), but needs to develop a minimum of 0.8 BAR (12 PSI) above that to function correctly. Minimum head pressure needed is 30 metres. (1 metre of head equals 1.45 PSI).


  • 220-240V
  • 50/60 Hertz
  • Max Current: 30 Amps
  • Rated: 3.1k
  • Protection Grade: IP65
  • Max Water Temp: 60 degrees
  • Starting Pressure: 2.2 BAR. Cut out is governed by your pump
  • Inlet/Outlet: 25mm
  • Size: 180mm (H) x 230mm (W) x 250mm (D)
  • Electronic lights for Power, Working and Failure
  • Manual start (reset) switch


  • Run dry protection for your pump
  • Wired up and ready to go (for 10 Amp pumps) - no electrician needed
  • Installation instructions included
  • Automatic
  • Suitable for drinking water
  • Keeps a constant pressure

Related Products

Related Categories


Call: 0412 150 120