Call: 0412 150 120

All Categories

0
Rule 1100 bilge pump automatic sensor 12v 69Lmin submersible bilge water pump - Escaping Outdoors
Print

Automatic Bilge Pump 12v 69 L/min

$ 309.00
Incl GST
Product SKU : RWB810

Description

12 volt Automatic Boat Bilge Pump - Rule 1100 GPH 12 volt Automatic Sensing electric bilge pump - no float switch required. The Rule automatic bilge pump turns on every 2 1/2 minutes and continues to run until water is removed. Water level is kept between 3-10mm high. The bilge pump is totally submersible, extremely efficient and draws a low current whilst offering high capacity output.

Note - using the included check valve will reduce the output flow of the pump. Consumes only 0.25 amps per day. 12v DC only - Cannot be run through 240v to 12v transformers. This Rule pump is available in both 12v and 24v models. This listing is for the 12 volt bilge pump model. 3 year limited warranty.

FEATURES

  • Fully portable
  • Automatic operation - no float switch required
  • Infused water blocking feature
  • Backflow prevention check valve
  • Can pump fresh or salt water
  • Extra Heavy Duty water/air cooled motor
  • Ignition protected
  • Can run dry for short periods
  • Teflon seals and stainless shaft
  • Snap off strainer
  • Easy to install and operate
  • Robust
  • Comes with instructions

SPECIFICATIONS

  • 12 volt
  • 3.7 amp power draw
  • 69 litres per minute
  • Threaded hose outlets supplied for both 25mm (1") and 28mm (1 1/8") hose
  • Compact 120 (H) mm x 74 (W) mm
  • Maximum fluid temperature 60 degrees

Rule Bilge 12v 24v water pump range performance chart graph - Escaping Outdoors

Related Products

Related Categories

×

Call: 0412 150 120


TOP