Call: 0412 150 120

All Categories

0
Rule 500 bilge pump automatic sensor 12v 31LPM Submersible water pump - Escaping Outdoors
Print

Rule 500 Automatic Boat and Marine Bilge Pump 12v 31 L/min

$ 232.00
Incl GST
Product SKU : RWB807

Description

Rule 500 GPH 12v Automatic Sensing electric bilge pump - no float switch required. The Rule automatic bilge pump turns on every 2 1/2 minutes and continues to run until water is removed. Water level is kept between 3-10mm high. The bilge pump is totally submersible, extremely efficient and draws a low current whilst offering high capacity output.

Note - using the included check valve will reduce the output flow of the pump. Consumes only 0.20 amps per day. 12v DC only - Cannot be run through 240v to 12v transformers. Available in both 12v and 24v models. This listing is for the 12 volt model. 3 year limited warranty.

Rule 500 12v automatic sensing bilge pump features

  • Fully portable
  • Automatic operation - no float switch required
  • Infused water blocking feature
  • Backflow prevention check valve
  • Can pump fresh or salt water
  • Extra Heavy Duty water/air cooled motor
  • Ignition protected
  • Can run dry for short periods
  • Teflon seals and stainless shaft
  • Snap off strainer
  • Easy to install and operate
  • Robust
  • Comes with instructions

Rule 500 12v automatic sensing bilge pump specifications

  • 12 volt
  • 1.6 amp power draw
  • 31 litres per minute
  • Threaded hose outlets suits 20mm (3/4") hose
  • Compact - 107mm Height x 74mm width x 64mm depth - not including discharge
  • Maximum fluid temperature 60 degrees

Rule Bilge 12v 24v water pump range performance chart graph - Escaping Outdoors

Related Products

Related Categories


TOP