Call: 0412 150 120

All Categories

0
Escaping Outdoors 0.75L accumulator pressure tank for potable water Australia
Escaping Outdoors 0.75L accumulator pressure tank for potable water Australia
Escaping Outdoors 0.75L coffee cart accumulator tank
Print

750ml Accumulator Tank

$ 90.00
Incl GST
Product SKU : EOAT

Description

An accumulator tank is an underestimated requirement for a smooth running water pump system in most caravans and boats. Our Escaping Outdoors compact pre-pressurised accumulator / pressure tank will fit into a tight space. This accumulator tank is for potable drinking water and wll give you a smoother water flow, quieter operation, will save your power and will extend the life of your pump. A must for every pressurized water pump set up!

FEATURES

  • Fully sealed
  • Compact size
  • Easy to install and operate
  • Will align with your pumps PSI rating
  • Made from tough durable materials
  • Reliable Escaping Outdoors brand
  • Non corrosive nylon outer casing
  • Internal rubber membrane eliminates maintenance
  • Universal mounting
  • Easily fitted to new or existing systems
  • Installation Instructions included

SPECIFICATIONS

  • Model: EOAT
  • 750 ml accumulator tank
  • Supplied with straight snap in port kits for 12mm I.D. hose
  • Pre-charged pressure: 10PSI (0.7BAR) ( Contact us with the purchase to let us know the pump you are matching the accumulator tank to and we will pre - charge the pressure to the recommendation for the pump you are using).
  • Air filled valve - standard automotive style tyre valve
  • Dimensions: 8.1" (205mm) x 4.6" (116mm)

Typical 12v 24v 240v water pump set up for Escaping Outdoors pumps

Typical food van coffee cart water pump set up - Escaping Outdoors

The Escaping Outdoors quality accumulator / pressure tank will hold a store of pressurised water to reduce unnecessary pump cycling, pulsation and water hammer when installed between the pump and the tap. An accumulator / pressure tank can also be used to moderate the flow to match your Hot Water Service. An accumulator / pressure tank can be fitted to new or existing pump system installations.

This size accumulator tank is recommended where space is tight and for any 12v or 24v pump system and for coffee carts to protect your coffee machine, for food vans using a 240v diaphragm water pump or in your boat or caravan. This accumalator tank is designed for use with any system controlled by a pressure switch.

HOW A PRESSURE TANK WORKS

a. Accumulator tank / pressure tank contains a factory charged air cushion. This is usually 10% the rest fills with water.

b. When the pump starts, water enters the accumulator reservoir. At maximum pressure the system is filled. The pump then shuts off.

c. When water is demanded at the tap / outlet, pressure in the air chamber forces water into the system. The pump stays off until the water in the pressure tank has emptied or till minimum pressure is reached, then the pump starts and runs until pressure is reached. Therefore the pump doesn't necessarily turn on each time you demand water at the outlet.

The pressure tank will absorb excess pressure in your system before it reaches your pump and causes damage. Therefore protecting the life of the pump and the pump pressure switch.

Related Products

Related Categories

×

Call: 0412 150 120


TOP