Escaping Outdoors 12v water pump 35 PSI pressure switch
Print

Escaping Outdoors 12v Pump 35 PSI Pressure Switch

$ 22.00
Incl GST
Product SKU : FLPS35PSI

Description

Escaping Outdoors sells a large range of 12v water pump pressure switch, pump parts and accessories including the Escaping Outdoors 35 PSI pressure switch and seal kit to suit the Escaping Outdoors FL35 and FL2202 12 volt water pumps.

If your pressure switch fails after a short time the most likely cause is an inbalance of pressure in the pump system which results in excess tork on the water pump motor. Pressure switch failure will stop the pump operating and protect the water pump from further damage to the motor or diaphragm. If you feel you are going through too many pressure switches it is an indication your set up needs refining. Refinement will depend on the application. Please phone or contact us for technical help with your water pump set-up.

Escaping Outdoors 35PSI Diaphragm pressure switch specifications

  • 35 PSI
  • Simple and easy to replace
  • Fine tune pressure adjustment screw
  • Overall dimensions 32 x 32 x 26mm
  • Mounting screw holes 35mm centre to centre
  • Your pressure switch will be sent with tracking

Check out article in FAQ's on how to test for a failed pressure switch and other articles on 12v water pumps which may be of interest.

Related Products

Related Categories

Escaping Outdoors 35 PSI Pressure Switch & Seal Kit Escaping Outdoors 17 PSI Pressure Switch & Seal Kit
Back to: warehouse-express-shipping